Model - 55BDL1007X
Connectivity- HDMI/DVI/VGA/RS232/USB/RJ-45/ Built-in-speaker 10W+10W Bezel to Bezel 3.5mm Portrait & Landscape
Full HD LED technology
White LED's are solid state devices which light up to full, consistent brightness faster saving startup time. LED's are free from mercury content which allows for eco-friendly recycling and disposal process. LED's allow for better dimming control of LCD backlight, resulting in super high contrast ratio. It also gives superior color reproduction thanks to consistent brightness across the screen.
IPS Display Technology
Philips IPS displays uses an advanced technology which gives you extra wide viewing angles of 178/178 degree, making it possible to view the display from almost any angle - even in portrait mode. IPS displays gives you remarkably crisp images with vivid colors, especially suitable for professional video wall and menuboard applications which demand color accuracy and consistent brightness at all times.
Ultra Narrow Bezel
The next generation of video wall displays is designed with industry narrowest bezels and advanced alignment solutions. Fully exploit your impactful signage content with ultra narrow bezel displays, and make sure your message does not get lost by thick bezels. With the ultra narrow bezels you can create seamless video wall configurations of virtually any size.
Advanced Colour Calibration
The Advanced Colour Calibration kit controls the luminance of the backlight, standardizes the gamma curve and calibrates the greyscale of your display network. Whether you have an impressive video wall, a catchy mosaic layout, a menu board installation or a control room each display can be adjusted to the same colour values. With this optional kit you ensure consistent colour performance over all displays in your network.
Keeping your content up and running is critical for demanding commercial applications. While it is unlikely you will face a content disaster, FailOver provides content protection with a revolutionary technology that plays back-up content on screen in the event of a media player failure. FailOver automatically kicks in when the primary input fails. Simply select a primary input connection and a FailOver connection and your ready for instant protection.
The backlight intensity can be controlled and pre-set by the system to reduce the power consumption by up to 50%, which saves substantially on energy costs.
Turn your display into an all-in-one digital signage solution and create a display network which is connected, intelligent and secure. Open Pluggable Specification (OPS) is an industry standard slot into which you can add an OPS-standardized media player. This cable free solution gives you the ability to install, use or maintain your hardware whenever you need.
Designed for 24/7 operation
Because business never sleeps, our signage displays are designed for 24/7 use. Taking advantage of superior components to ensure a higher level of quality, you can count on this range of models for complete around-the-clock reliability.
CMND and Control
With CMND & Control, easily manage multiple displays in a central location. With real time display monitoring, setting and software updates from a remote location, and the ability to customise and configure multiple displays at once, such as video wall or menu board displays, controlling your suite of displays has never been easier.
Enjoy a clearer image in areas with greater ambient brightness thanks to the 700 nit panel. Your audience can enjoy better image quality in locations that are away from direct sunlight, yet still brighter than average, optimising the viewing experience.
|Diagonal screen size (metric)||138.7 cm|
|Diagonal screen size (inch)||55 inch|
|Optimum resolution||1920 x 1080 @ 60 Hz|
|Contrast ratio (typical)||1200:1|
|Dynamic contrast ratio||500,000:1|
|Response time (typical)||8 ms|
|Pixel pitch||0.63 x 0.63 mm|
|Display colors||1.07 B|
|Viewing angle (H / V)||178 / 178 degree|
|Picture enhancement||3/2 - 2/2 motion pull down, 3D Combfilter, Motion compens. deinterlacing, Progressive scan, 3D MA deinterlacing, Dynamic contrast enhancement|
|Panel resolution||1920 x 1080p|
|Video input||Component (RCA), Composite (RCA), DVI-D, HDMI (x 2), VGA (Analogue D-Sub), DisplayPort (1.2)|
|Video output||DisplayPort, DVI-I, VGA (via DVI-I)|
|Audio input:||3.5-mm jack, Audio Left/Right (RCA)|
|Audio output||Audio Left/Right (RCA), External speaker connector|
|External control||IR (in/out) 3.5 mm jack, RJ45, RS232C (in/out) 2.5 mm jack|
|Supported Display Resolution|
|Computer formats||640 x 480, 60, 67, 72, 75 Hz
800 x 600, 56, 60, 72, 75 Hz
1024 x 768, 60 Hz
1280 x 768, 60 Hz
1280 x 800, 60 Hz
1280 x 1024, 60 Hz
1360 x 768, 60 Hz
1366 x 768, 60 Hz
1440 x 900, 60 Hz
1600 x 1200, 60 Hz
1920 x 1080, 60 Hz
1920 x 1200, 60 Hz
480i, 60 Hz
|Placement||Landscape (24/7), Portrait (24/7)|
|Ease of installation||Carrying Handles, Smart Insert|
|Energy saving functions||Ambient light sensor, Smart Power|
|Signal Loop Through||RS232, VGA, DisplayPort, DVI, IR Loop through|
|Network controllable||RS232, RJ45, Card OPS RS232, One Wire (HDMI-CEC)|
|Screen saving functions||Pixel Shift, Low Bright|
|Tiled Matrix||Up to 10 x 10|
|Control software||SICP / CMND & Control|
|RJ45 hub||2 ports|
|Standby power consumption||<0.5 W|
|Consumption (On mode):||168W|
|Temperature range (operation)||0 ~ 40 °C|
|Temperature range (storage)||-20 ~ 60 °C|
|Relative humidity||20 ~ 80 %|
|Altitude||0 ~ 3000 m|
|Built-in speakers||2 x 10W RMS|
|Included accessories||Remote Control, Batteries for remote control, AC Power Cord, RS232 cable, Quick start guide, Edge alignment pins, Edge alignment plates|
|Optional accessories||Edge finishing kit, HDBaseT OPS Receiver (CRD25), Colour calibration kit|
|Bezel width||0.9mm (Even Bezel)|
|Set dimensions (W x H x D)||1211.4 x 682.2 x 98.5 mm|
|VESA Mount||400 x 400 mm|
|Product weight||24.35 kg|
|Bezel thickness||1.8 mm (A-A)|